Riplock C3
Adjustable length self-locking pull-up seal, with tear line, optional tear-off receipt and optional label holder. The overall length is 33cm and operational length of 20cm. Available with numbers stamped in hot foil, inkjet, plastic in-mould-label, or with a bar code either inkjet printed directly on the seal or laser printed on plastic in-mould-label. Supplied in mats of 8. A slit at the end of the tail enables the use of a pull-up tool for a tighter closure. Used for applications that require an intermediate size and stronger seal, such as Containers, Bags, Tote Boxes, Cabinets, Vehicle Doors, Trolleys, Roll Cages, and innumerous other applications.
DownloadDescription
Product | Tamper evident plastic security seal |
---|---|
Model | Riplock C3 |
Plastic | Polypropylene |
Product codes | Riplock C3 NHR #061NHR30PP With tear-off receipt Riplock C3 NH #061NH30PP Without tear-off receipt Riplock C3 Inkjet #061IR30PP With tear-off receipt Riplock C3 Inkjet #061I30PP Without tear-off receipt Riplock C3 IJRCB #061IRCB12830PP With tear-off receipt Riplock C3 IJCB #061ICB12830PP Without tear-off receipt Riplock C3 IML Transfer #061RIMLN30PP Without tear-off receipt Riplock C3 IML Transfer 128 C #061RIMLCB130PP Without tear-off receipt |
Description | Adjustable length self-locking pull-up seal with tear line, and optional tear-off receipt Numbers hot stamped, inkjet, or laser printed on plastic in-mould-label Bar code inkjet, or laser printed on plastic in-mould-label Plastic in-mould labels are laser printed on reverse side of transparent plastic, for added security and protection, and bonded to seal at time of injection |
Overall and operational lengths and tail measurements | Overall 333mm Operational 200mm Tail width/thickness 6.5mm x 3.5mm |
Numbering | Numbers hot stamp, inkjet, or plastic in-mould-label Bar code 128C inkjet or laser printed on plastic in-mould-label. Consult on availability of other bar codes |
Personalisation | For extra identification, personalisation with name or logo is available. Subject to quantity required |
Special features |
|
FEATURES:
This tamper evident plastic Riplock C3 security seal is a self-locking adjustable length pull-up seal, manufactured with Polypropylene plastic material. It is one of the more robust seals of the Riplock series, and is suitable for applications that demand a longer tail and more tensile strength. The seals can be either numbered in hot stamp, inkjet, laser printed on plastic in-mould-label, or with a bar code that is either inkjet or laser printed on a plastic in-mould-label. A special feature with this model is that is has the optional choice of a detachable numbered or bar coded receipt, with the corresponding numbers or bar code remaining on the fixed part of the tab. If required, for minimum quantities of 5,000, the seals can be personalised with name or logo. The seals can be supplied with or without a loop for attaching a label. It also has a tear-off tab, so no tools are necessary when removing the seal. To help with the tightening of the seal an optional pull-up tool is available. This model is supplied in mats of 8, and for convenient use and distribution are packed in plastic bags of 80 (10 mats of 8), fifteen of which are packed in cartons of 1,200.
Riplocks are more commonly used on the following applications but may also meet a wide range of other sealing requirements:
- UD and LD containers
- Duty-free
- Baggage check-in
- Drums and trailer storage
- Asset protection
- Tanker valves
- Cabinets
- Quality control
- Storage boxes
Reviews
There are no reviews yet.