FEATURES:   
The anchor seal series of plastic tamper evident seals are suitable for use on an unlimited range of different sealing requirements. Manufactured with Polypropylene, or Polycarbonate plastic material. The Polypropylene anchor seals are available with or without a random or sequential high relief numbered tag. For identification of seals without a numbered tag the capsule can be marked with a designated marking tool. Polypropylene seals can be supplied with or without integrated plastic sealing thread, or pre-assembled wire. For seals supplied without the integrated plastic sealing thread, or without the pre-assembled wire, then any other type of thread, up to 0.81mm per strand, can be used.
Although of the same series, the main differences, apart from the plastic material, between the Polypropylene and the Polycarbonate anchor seals, are that the Polycarbonate seals are translucent, and have a larger tab that is either fixed, or with a detachable receipt. With the Polycarbonate seal there is a choice of laser printed sequential numbers, or a laser printed bar code on a white background. On the polycarbonate seals with a fixed tab the sequential numbering, or bar code, is printed only on the tab. For those with a detachable receipt, the sequential numbering is also printed on the capsule. In the case of a bar coded seal with a detachable receipt, only the bar code number is printed on the capsule.
Both the Polypropylene and Polycarbonate seals can be personalised with letters, numbers, name or logo.