Call us Today +44(0)7740-539218

Anchor seal – AR series

A one piece capsule and anchor seal, pre-assembled with 16cm length, 2.4mm x 0.3mm, galvanised metal band. Other lengths of 25, 30, 39, 50, 79 are available. As the seals are unnumbered, and if required, on the spot identification on one or both sides of the capsule can be made using the marking tool. For quantities over 10,000 the capsule can be personalised with moulded high relief numbers, letters or logo. No tools required for sealing. Instead of wire, this AR unnumbered model offers a choice of different lengths of a metal band attached to the seal.

Download

Description

ProductTamper evident plastic security seal
ModelAnchor seal – AR series
PlasticPolypropylene
Product codeAnchor seal – AR series – AR #003P16GV0PP
DescriptionIntegrated anchor and capsule, with galvanised metal band
Sealing threadPre-assembled standard length 16cm, 2.4mm x 0.3mm, galvanised metal band. Other lengths available are 25, 30, 39, 50, 79cm
CapsulePlain capsule can be marked on one or both sides by using dedicated marking pliers. For quantities over 10,000 the capsule can be injection moulded in high relief, on one or both sides, with letters, numbers, or logo.
NumberingThe AR series are unnumbered. For a numbered anchor seal see ARN series
Special features
  • Pre-assembled galvanised metal band. No tools needed for sealing
  • Marking tool for on-the-spot  identification on one or both sides of capsule (see data sheet)

FEATURES:   
The anchor seal series of plastic tamper evident seals are suitable for use on an unlimited range of different sealing requirements. Manufactured with Polypropylene, or Polycarbonate plastic material. The Polypropylene anchor seals are available with or without a random or sequential high relief numbered tag. For identification of seals without a numbered tag the capsule can be marked with a designated marking tool. Polypropylene seals can be supplied with or without integrated plastic sealing thread, or pre-assembled wire. For seals supplied without the integrated plastic sealing thread, or without the pre-assembled wire, then any other type of thread, up to 0.81mm per strand, can be used.
Although of the same series, the main differences, apart from the plastic material, between the Polypropylene and the Polycarbonate anchor seals, are that the Polycarbonate seals are translucent, and have a larger tab that is either fixed, or with a detachable receipt. With the Polycarbonate seal there is a choice of laser printed sequential numbers, or a laser printed bar code on a white background. On the polycarbonate seals with a fixed tab the sequential numbering, or bar code, is printed only on the tab. For those with a detachable receipt, the sequential numbering is also printed on the capsule. In the case of a bar coded seal with a detachable receipt, only the bar code number is printed on the capsule.
Both the Polypropylene and Polycarbonate seals can be personalised with letters, numbers, name or logo.

APPLICATIONS:   
Plastic tamper evident Anchor seals are more commonly used on the following applications but may also meet a wide range of other sealing requirements:
- Electricity, gas and water meters
- ATM currency cassettes
- Drums and hatches
- Tanker valves
- Franking machines
- Weights and measuring devices
- Quality control
- Storage boxes
- Cabinets and cassettes
- Fisheries and hunting tags
- Brand Identification
- Minibars
- Warranty control
- Pouches
- Zipper bags

Reviews

There are no reviews yet.

Be the first to review “Anchor seal – AR series”

Your email address will not be published. Required fields are marked *

Message Us on WhatsApp
Welcome to S4S
Welcome to S4S
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad