Call us Today +44(0)7740-539218

Anchor seal – ARN series

One piece capsule, anchor and tab seal, with seven numbers moulded in high relief on the tab. These high relief moulded numbers eliminate the possibility of alterations or forged copies and make the seal individually identifiable. The seal is pre-assembled with a standard 16cm length, 2.4mm x 0.3mm, galvanised metal band. Other lengths of 25, 30, 39, 50, 79cm are available. For quantities over 10,000 the capsule can be personalised in high relief on one or both sides. No tools necessary for sealing. Instead of wire, this ARN is numbered and offers a choice of different lengths of metal band attached to the seal.



ProductTamper evident plastic security seal
ModelAnchor seal – ARN series
Product codeAnchor seal – ARN series – ARN #013N16GV0PP
DescriptionOne piece anchor, capsule and tab with high relief numbering, pre-assembled with galvanized metal band
Sealing threadPre-assembled standard length 16cm, 2.4mm x 0.3mm, galvanised metal band. Other lengths available are 25, 30, 39, 50,79cm.
CapsulePlain capsule can be personalised in high relief, on one or both sides, with letters, numbers, or logo for quantities above 10,000.
Numbering7 numbers, random or sequential, moulded in high relief
Special features
  • Each seal individually identifiable by number on tab, that is injection moulded in high relief.
  • High relief numbers eliminate the possibility of alterations or forged copies.
  • Pre-assembled galvanised metal band
  • No tools necessary for sealing

The anchor seal series of plastic tamper evident seals are suitable for use on an unlimited range of different sealing requirements. Manufactured with Polypropylene, or Polycarbonate plastic material. The Polypropylene anchor seals are available with or without a random or sequential high relief numbered tag. For identification of seals without a numbered tag the capsule can be marked with a designated marking tool. Polypropylene seals can be supplied with or without integrated plastic sealing thread, or pre-assembled wire. For seals supplied without the integrated plastic sealing thread, or without the pre-assembled wire, then any other type of thread, up to 0.81mm per strand, can be used.
Although of the same series, the main differences, apart from the plastic material, between the Polypropylene and the Polycarbonate anchor seals, are that the Polycarbonate seals are translucent, and have a larger tab that is either fixed, or with a detachable receipt. With the Polycarbonate seal there is a choice of laser printed sequential numbers, or a laser printed bar code on a white background. On the polycarbonate seals with a fixed tab the sequential numbering, or bar code, is printed only on the tab. For those with a detachable receipt, the sequential numbering is also printed on the capsule. In the case of a bar coded seal with a detachable receipt, only the bar code number is printed on the capsule.
Both the Polypropylene and Polycarbonate seals can be personalised with letters, numbers, name or logo.

Plastic tamper evident Anchor seals are more commonly used on the following applications but may also meet a wide range of other sealing requirements:
- Electricity, gas and water meters
- ATM currency cassettes
- Drums and hatches
- Tanker valves
- Franking machines
- Weights and measuring devices
- Quality control
- Storage boxes
- Cabinets and cassettes
- Fisheries and hunting tags
- Brand Identification
- Minibars
- Warranty control
- Pouches
- Zipper bags


There are no reviews yet.

Be the first to review “Anchor seal – ARN series”

Your email address will not be published. Required fields are marked *

Message Us on WhatsApp
Welcome to S4S
Welcome to S4S
Questions, doubts, issues? We're here to help you!
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
Have you got question? Write to us!
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad