Anchor seal – AW series
A one piece capsule and anchor seal, pre-assembled with a 16cm length two strand 0.81mm galvanised wire. Other lengths of 25, 30, 39, 50 and 79cm are available. As the seals are unnumbered, and if required, on the spot identification on one or both sides of the capsule can be made using the marking tool. For quantities over 10,000 the capsule can personalised with moulded high relief numbers, letters or logo. No tools required for sealing. With a choice of different lengths of attached wire this AW, unnumbered model, is for applications that require a wire of a long length, or one that can pass through small apertures.
DownloadDescription
Product | Tamper evident plastic security seal |
---|---|
Model | Anchor seal – AW series |
Plastic | Polypropylene |
Product code | Anchor seal – AW series – AW #002P16GVT2PP |
Description | One piece anchor and capsule with pre-assembled wire |
Sealing thread | Pre-assembled standard length 16cm, 2 strand galvanised wire, diameter 0.81mm, other lengths available are 25, 30, 39, 50, 79cm |
Capsule | Plain capsule. Can be marked on the spot with dedicated marking pliers. For quantities over 10,000 can be personalised in high relief on one or both sides |
Numbering | Not available with this model. For a numbered anchor seal with wire see AWN series |
Special features |
|
FEATURES:
The anchor seal series of plastic tamper evident seals are suitable for use on an unlimited range of different sealing requirements. Manufactured with Polypropylene, or Polycarbonate plastic material. The Polypropylene anchor seals are available with or without a random or sequential high relief numbered tag. For identification of seals without a numbered tag the capsule can be marked with a designated marking tool. Polypropylene seals can be supplied with or without integrated plastic sealing thread, or pre-assembled wire. For seals supplied without the integrated plastic sealing thread, or without the pre-assembled wire, then any other type of thread, up to 0.81mm per strand, can be used.
Although of the same series, the main differences, apart from the plastic material, between the Polypropylene and the Polycarbonate anchor seals, are that the Polycarbonate seals are translucent, and have a larger tab that is either fixed, or with a detachable receipt. With the Polycarbonate seal there is a choice of laser printed sequential numbers, or a laser printed bar code on a white background. On the polycarbonate seals with a fixed tab the sequential numbering, or bar code, is printed only on the tab. For those with a detachable receipt, the sequential numbering is also printed on the capsule. In the case of a bar coded seal with a detachable receipt, only the bar code number is printed on the capsule.
Both the Polypropylene and Polycarbonate seals can be personalised with letters, numbers, name or logo.
Plastic tamper evident Anchor seals are more commonly used on the following applications but may also meet a wide range of other sealing requirements:
- ATM currency cassettes
- Drums and hatches
- Tanker valves
- Franking machines
- Weights and measuring devices
- Quality control
- Storage boxes
- Cabinets and cassettes
- Fisheries and hunting tags
- Brand Identification
- Minibars
- Warranty control
- Pouches
- Zipper bags
Reviews
There are no reviews yet.